JB-QB-JBF-51S01 fire alarm controller (linkage type)

 1. Overview of JB-QB-JBF-51S01 fire alarm controller (linkage type)

JB-QB-JBF-51S01 controller is a new generation of small wall-mounted fire alarm controller (referred to as controller) host launched by Jade Bird Fire Co., Ltd. The controller adopts a metal chassis structure, and the ultra-thin chassis structure design increases the application scenarios and scope of this product. It can be installed in-wall or conventional wall-mounted. It can be applied to large and medium-sized places, such as office buildings, high-end office areas, government libraries and other high-end places.
2. Functional characteristics of JB-QB-JBF-51S01 fire alarm controller (linkage type)

1) The two buses have no polarity and adopt address coding technology. The return line adopts the non-polarity wiring method of two buses, the building wiring is simple, the wiring paths and methods are arbitrary, and there is no order, which improves the wiring reliability, facilitates threading construction and line maintenance, and can greatly reduce the project cost.

2) LCD Chinese/English interface, can use the special software specially developed by Jade Bird Fire to make detailed Chinese 16 Chinese characters or 32 characters alarm address notes, and can display the specific equipment and alarm location of the fault or alarm, so that the displayed content It is clear at a glance, and the operation is convenient, clear and intuitive, realizing a good man-machine dialogue.

3) The system adopts distributed intelligent settings, and all matching field components have built-in microprocessors, thereby greatly reducing the amount of information transmission between the detector and the controller, and further improving the reliability of the fire alarm system.

4) Black box function. The controller has a built-in large-capacity memory, which can save various alarm information such as controller startup, shutdown, fire alarm, and fault. It is convenient for information query after the accident, and the information in the historical record can be printed out by time and type.

5) Strong anti-interference ability. Both hardware and software of the controller have good anti-interference measures, and the controller can operate normally and stably in an environment with strong electromagnetic interference.

6) Support no master-slave networking. It can support a network of up to 99 controllers at the same time, and can seamlessly network with various subsystem controllers of Jade Bird Fire.

7) The wall-mounted controller has a system capacity of 2 loops, a single loop supports a maximum of 252 points (62 protocols), and the system has a maximum of 504 points.

8) On-site linkage logic programming technology. Any logic programming of the controller can be realized, and the programming is simple and convenient.

9) In the networking mode, functions such as cross-controller linkage and setting automatic permission of other networked controllers can be completed, and the system composition is more flexible and the structure is more reasonable.
3. Technical parameters of JB-QB-JBF-51S01 fire alarm controller (linkage type)
Display operation unit 1
Display 4.3 inch color screen
Number of loops/components loaded 2 loops; 200 points/loop (11S protocol), 252 points/loop (62S protocol)
Manual direct control output 6 groups
Manual bus linkage control output 8 groups
1 printer, serial port connection
2 relay contacts, passive output, 2 groups of fire alarm and fault normally open/normally closed adjustable, contact capacity 1A@24VDC
Communication interface 1 external CAN interface, 1 RS23 interface, 1 USB interface
Operating environment temperature -10°C~+50°C, relative humidity ≤95%
Storage environment temperature -20℃~+65℃, relative humidity ≤95%
Input voltage 220VAV, 50Hz/60Hz
Power capacity 3A@24VDC
External output 1A@24VDC (two outputs, of which output 2 is powered off for 3s with the reset of the alarm controller)
Backup battery 12VDC/2.8Ah, 2 pieces
Optional accessories JBF589X information interface card, 4G network card, Ethernet interface
Local machine address identification can be set through the local LCD screen interface
Dimensions L×W×H 340mm×80mm×460mm