JTY-GD-SD6800 point photoelectric smoke detector

 Shidao Fire Protection SD6820 intelligent digital fixed temperature detector integrates communication detection, built-in single-chip computer, and solidifies a highly reliable fire judgment program. The detector occupies a node address, adopts electronic encoding, and reads/writes the address through the encoder.

*Features

●Belongs to A2S type fixed temperature type temperature detector.

●Good stability, low false alarm rate, not affected by climate change.

●Electronic coding method is used for coding, which is easy to operate.

* Applicable places

The relative humidity is often greater than 95%, smokeless fires may occur, and there is often a lot of dust in the environment;

●Under normal circumstances there is smoke and steam retention environment;

●Kitchen, boiler room, tea stove room, generator room, drying workshop, etc.;

●Indoor garage, smoking room, etc.;

●Other halls and public places where smoke detectors are not suitable

Product standard GB4716-2005
Temperature Sensing Method Constant Temperature Type A2S
Working voltage 19V～28V
Working current ≤0.6mA
Protection area 40m2
Alarm current ≤3mA
Ambient temperature 0℃～80℃
Ambient humidity ≤95% non-condensing
Alarm temperature 54℃～70℃
Dimensions Φ104mm
Address range 1#～250#
Installation method Two bus system, non-polarity