JTY-HW-9008 Linear Infrared Beam Smoke Detector

 1. Overview of JTY-HW-9008 linear infrared beam smoke detector

The JTY-HW-9008 linear infrared beam smoke detector is composed of a transmitter and a receiver. The distance between the transmitter and the receiver is 5~100 meters. When a fire occurs, the receiver will be reduced due to smoke. The amount of received light is converted into an electrical signal to confirm the occurrence of a fire. The biggest feature of the detector is to monitor the linear area to ensure accurate alarm before the fire spreads. The detector is matched with the fire alarm host produced by Shanghai Songjiang Feifan Electronics Co., Ltd. The receiver of this detector can use the electronic encoder to set the detector address, the detector address is 1~252. Receiver built-in input module, module to bus loop. The longest shooting distance is 100m, the distance between two pairs of detectors is 14m, and the detectors are 7m away from the left and right walls.
2. Features of JTY-HW-9008 linear infrared beam smoke detector

The receiver is equipped with an input module, a signal module and a bus loop.

Two bus system.

The longest shooting distance is 100m.

The distance between the two pairs of detectors is 14 meters, and the detectors are 7 meters away from the left and right walls.
3. Parameters of JTY-HW-9008 linear infrared beam smoke detector

Monitoring current: working current <3mA

Alarm/action current: working current<10mA

Wiring requirements

Transmitter power cord: BYJ line ≥ 2.5mm2

Receiver signal line: BYJ line ≥ 1.5mm2

Receiver power cord: BYJ line ≥ 2.5mm2

use environment

Temperature: -10℃～50℃

Relative humidity: ≤95% (40℃±2℃)

Dimensions mm: 86×100